Comparison of nutrient-rich and limited media in the production of biosurfactant by Achromobacter xylosoxidans BP(1)5

Aims@#This study aims to produce Achromobacter biosurfactant in nutrient-rich and nutrient-limited media.@*Methodology and results@#This study conducted fermentation on nutrient-rich and nutrient-limited media using a minimal salt medium (MSM). Dextrose and sodium citrate were used as sole carbon supplemented with 0.5% yeast extract for nutrient-rich media, while nutrient-limited media used molasses and rice straw hydrolysate (RSH) at variations of concentrations of 100 ppm and 200 ppm. The research was performed over 120 h and evaluated from growth response, surface tension and emulsification activity. The study revealed that the best surface tension value was when 2% (w/v) sodium citrate was used as C-source and 0.5% (w/v) yeast extract as N-source, after 72 h upon incubation at 30 °C/120 rpm having 45.45 ± 2.19 mN/m with emulsification activity 24.54 ± 3.42%. Whereas the best result of the nutrient-limited medium was obtained by RSH at a concentration of 200 ppm having 48.86 ± 5.36 mN/m.@*Conclusion, significance and impact of study@#The experiment showed that nutrient-limited medium from rice straw hydrolysate could compete with the nutrient-rich medium. The use of rice straw will contribute to the reduction of biosurfactant production costs and valorisation of agricultural waste.

Tecnologic Development on Pleurotus Cultivation: Specific Practices Used in Brazil

HIGHLIGHTS P. ostreatus and P. sapidus are the most productive species under the evaluated conditions. Different growing systems are suitable for the production of P. ostreatus var. Florida. Temperature control level affects differently the P. ostreatus var. Florida isolates. Environmental and strain factors affect yield and production parameters of P. ostreatus var. Florida.

Abstract In Brazil, Pleurotus is the most important mushroom produced especially P. ostreatus var. Florida. In this country as in many others, the great potential for mushroom cultivation remains unexplored. Therefore, it is very important to develop new studies that allow optimizing its production. The aims of the manuscript were: i) to evaluate the productivity of six different species of Pleurotus (P. citrinopileatus; P. djamor; P. ostreatus; P. ostreatus var. Florida; P. pulmonarius; P. sapidus); ii) to measure the effect of three different environmental conditions during cultivation of three isolates of P. ostreatus var. Florida. As results, P. ostreatus and P. sapidus were the most productive isolates under the evaluated conditions. Different environments produced variable effects according to the P. ostreatus var. Florida isolates, being possible to observe a highly plastic strain (POF 02/18), a highly sensitive strain (POF 03/18) and a strain with variable responses (POF 01/18).

Enzymes modulation by dried grape pomace from the manufacture of wines and juices

The processing of grapes for the manufacture of juices and wines, generates large quantities of by-products rich in metabolites with antioxidant, antimicrobial, anti-inflammatory and cicatrizing activities. The high homology between human enzymes and snake venoms makes the latter valuable laboratory tools for the study of pathophysiological processes. Proteases and phospholipases A2 act in processes related to hemostasis and inflammatory response. Thus, in this work, dried pomace obtained from grape (Isabel, Niagara, Bordô, BRS Violeta and Blend cultivars) processing were evaluated on phospholipase, proteolytic, hemolytic and thrombolytic activities induced by snakes venoms and the content of phenolic compounds and minerals was evaluated. The dried pomace exerted inhibitory and potentiating actions in all analyzed activities. The enzymatic modulators present in the evaluated dried pomace have potential for therapeutic use, although their broad characterization is still necessary, in order to define adequate amounts and formulations to obtain efficacy and safety in their use.

Amylase Production by Solid State Fermentation of Agro-industrial Wastes Using Bacillus species

This study evaluated amylase production by Bacillus species employing the solid state fermentation (SSF) method using five agro-industrial wastes namely corn cobs, potato peel and maize straw, groundnut husk and corn chaff. Five Bacillus species were tested for amylase production abilities and Bacillus subtilis showed the highest amylase production ability after incubation. Corn chaff gave maximum enzyme production (3.25 U/ml) while the least enzyme was recorded on groundnut husk (2.35 U/ml) at 25. Potato peel had maximum enzyme production by Bacillus subtilis (3.05 U/ml) at pH 7.0 while the least enzyme production was from groundnut husk (2.84 U/ml) at pH 4.0.Thus there was an increase in enzyme production with corresponding increase in substrate concentration. The results obtained in this study support the suitability of using agro-industrial wastes as solid state fermentation substrates for high production of amylase. It’s also a means of solving pollution problems thus making solid state fermentation an attractive method.

Endoglucanase production by endophytic fungi isolated from vitis labrusca l. with peanut hull and sawdust as substrates / Produção de endoglucanase por fungos endofíticos isolados de Vitis labrusca L. utilizando casca de amendoim e serragem como substratos

Endoglucanases are enzymes widely employed in different industrial fields, albeit with high production costs. Studies on new microbial sources and low-cost substrates are highly relevant, including those on agro-industrial. Current analysis evaluates peanut hull (PH) and sawdust (SD) as substrates for submerged cultures of 14 endophytic fungi isolated from grapevine (Vitis labrusca L.) cultivars Bordô and Concord. Endophytes were grown on a carboxymethylcellulose (CMC) medium and the cup plate assay showed that eight strains (belonging to genera Cochliobolus, Diaporthe, Fusarium and Phoma) had positive results: enzymatic halos ranged from 10.8±0.02to 15.5±0.07 mm in diameter. Diaporthe sp. strains (GenBank accession codes KM362392, KM362368 and KM362378) and Fusariumculmorum KM362384 were highlighted as the most promising sources. Further, PH and SD as substrates for the fermentation of these fungi were evaluated by the cup plate assay and endoglucanase activity assay. Highest halo diameters were obtained for Diaporthe sp. KM362392: 16.1±0.01 mm (CMC), 14.5±0.01 mm (PH) and 14.7±0.03 mm (SD). The fungus also presented the highest levels of endoglucanase activity: analysis of variance revealed that CMC (3.52±0.98 µmol/min), PH (2.93±0.23 µmol/min) and SD (3.26±0.38 µmol/min) were similarly efficient as substrates. Results deepen knowledge on V. labrusca endophytes that may be endoglucanase sources, eventhough further optimizations in submerged cultures with PH and SD should be undertaken to increase theenzymatic production from these wastes.

Endoglucanases são enzimas amplamente empregadas em diferentes setores industriais; embora sua produção apresente custos elevados. Estudos sobre novas fontes microbianas e substratos mais baratos são de grande importância, incluindo os resíduos agroindustriais. Nesse estudo, casca de amendoim (CA) e serragem (SE) foram testadas como substratos para o cultivo submerso de 14 fungos endofíticos isolados das cultivares Bordô e Concord de videira (Vitis labrusca L.) Os endófitos foram crescidos em meio contendo carboximetilcelulose (CMC) e o ensaio cup plate mostrou resultados positivos para oito fungos (pertencentes aos gêneros Cochliobolus, Diaporthe, Fusarium and Phoma); os halos enzimáticos variaram entre 10,8±0,02 e 15,5±0,07 mm de diâmetro. Linhagens de Diaporthe sp. (códigos de acesso no GenBank KM362392, KM362368 e KM362378) e Fusariumculmorum KM362384 se destacaram como produtores mais promissores. Então, o uso de CA e SE como substratos para a fermentação desses fungos foi avaliado pelo ensaio cup plate e pela quantificação da atividade de endoglucanase. Os maiores halos enzimáticos foram obtidos para Diaporthe sp. KM362392: 16,1±0,01 mm (CMC), 14,5±0,01 mm (CA) e 14,7±0,03 mm (SE). Esse fungo também apresentou os maiores níveis de endoglucanase: a análise de variância revelou que CMC (3,52±0,98 µmol/min), CA (2,93±0,23 µmol/min) e SE (3,26±0,38 µmol/min) foram substratos similarmente eficientes. Esses resultados expandem o conhecimento sobre endófitos de V. labrusca que são fontes de endoglucanases; futuras otimizações quanto ao cultivo submerso com CA e SE podem ser utilizadas para aumentar a produção enzimática a partir do uso desses resíduos.

Conversion of renewable substrates for biosurfactant production by Rhizopus arrhizus UCP 1607 and enhancing the removal of diesel oil from marine soil

BACKGROUND: The use of agro-industrial wastes to produce high value-added biomolecules such as biosurfactants is a promising approach for lowering the total costs of production. This study aimed to produce biosurfactants using Rhizopus arrhizus UCP 1607, with crude glycerol (CG) and corn steep liquor (CSL) as substrates. In addition, the biomolecule was characterized, and its efficiency in removing petroderivatives from marine soil was investigated. RESULTS: A 22 factorial design was applied, and the best condition for producing the biosurfactant was determined in assay 4 (3% CG and 5% CSL). The biosurfactant reduced the surface tension of water from 72 to 28.8 mN/m and produced a yield of 1.74 g/L. The preliminary biochemical characterization showed that the biosurfactant consisted of proteins (38.0%), carbohydrates (35.4%), and lipids (5.5%). The compounds presented an anionic character, nontoxicity, and great stability for all conditions tested. The biomolecule displayed great ability in dispersing hydrophobic substrates in water, thereby resulting in 53.4 cm2 ODA. The best efficiency of the biosurfactant in removing the pollutant diesel oil from marine soil was 79.4%. CONCLUSIONS: This study demonstrated the ability of R. arrhizus UCP1607 to produce a low-cost biosurfactant characterized as a glycoprotein and its potential use in the bioremediation of the hydrophobic diesel oil pollutant in marine soil

Production and Evaluation of Biosurfactant by Serratia marcescens UCP 1549 Using Industrial Wastes.

Aims: Biosurfactants are surface-active agents of microbial origin that have a property of lowering the surface tension between two liquids. This study aimed to the production of biosurfactant by Serratia marcescens UCP 1549 in medium containing agro-industrial wastes for making possible its industrial application in the near future and to propose its environmental applications. Place and Duration of Study: Center of Science and Technology from State University of Paraíba - UEPB, Campina Grande – PB, Brazil and Nucleus of Research in Environmental Sciences and Biotechnology (NPCIAMB), Catholic University of Pernambuco - UNICAP, Recife-PE, Brazil between June 2011 and July 2012. Methodology: According to the proposed factorial design, the culture medium was developed and used for the production of biosurfactant and incubated at 28ºC, 155 rpm during 48 h. The produced biosurfactant was evaluated by emulsifying index, emulsifying activity and surface tension using hydrophobic substrates as vegetable oils after frying, nhexadecane and diesel. Results: The best results for emulsification index were found between 79.92 and 100% of emulsification and for activity were values between 2.304 and 5.000 EA (emulsification activity) using vegetable oil after frying as substrate. In relation of the surface tension, the best value obtained was 33.10mN/m in the condition of the central point of the experimental design. Conclusion: The results show that Serratia marcescens UCP 1549 was capable of producing a biosurfactant with emulsifying property from industrial wastes in the studied conditions in this work.

Escória de aciaria na redução da solubilidade e lixiviação de manganês em áreas contaminadas / lmaking slag to reducing the solubility and leaching of manganese in contaminated areas

A escória de aciaria é um rejeito da produção do aço e possui propriedade corretiva da acidez do solo, podendo reduzir consequentemente a mobilidade de elementos traço. O trabalho objetivou avaliar a capacidade do resíduo industrial escória de aciaria em reduzir a solubilidade e lixiviação de Mn em resíduos contaminados. No Laboratório de Poluição de Solos da UFRRJ (Seropédica-RJ), foram realizados ensaios de lixiviação em colunas usando três resíduos contaminados com Mn, denominados G1, G2 e G3 e duas doses de resíduo inertizante (escória de aciaria). Nas colunas, foi aplicado um volume de água conhecido e constante que simula a precipitação máxima ocorrida nos últimos 17 anos na região onde foi coletado o resíduo. A maior dose do resíduo de escória de aciaria (6%) reduziu a solubilidade do Mn a valores inferiores ao limite máximo permitido pela ABNT, nos grupos G1, G2 e G3, sendo que o tratamento com 6% escória de aciaria + barreiras químicas foi o mais eficiente na redução da lixiviação de Mn em todos os grupos de resíduos estudados. Portanto, os resultados evidenciaram a eficiência da escória de aciaria na redução da solubilidade e lixiviação do Mn, em todos os resíduos.

Steelmaking slag is a waste of steel production and has owned corrective soil acidity and may consequently reduce the mobility of trace elements. The research aimed the capacity of industrial waste steelmaking slag to reduce the solubility and lixiviation of Mn in contaminated soil. In the Soil Pollution Laboratory of the UFRRJ (Seropédica-RJ), leaching experiments were carried using three different residues contaminated with Mn, and two doses of the inertizant residues steelmaking slag. In the columns were applied a known and constant volume of water, established to simulate the maximum precipitation occurred in the last 17 years, in the region where the residue was collected. The highest dose of steelmaking slag (6%) reduced the Mn solubility below the maximum allowed by ABNT, for G1, G2 and Ge, and the treatment with 6% steelmaking slag + barriers chemical was the most effective in reducing the leaching of Mn in all groups. Therefore, the results showed the efficiency of steelmaking slag in the reduction of Mn solubility and lixiviation in all residues.

Effect of acid hydrolysis and fungal biotreatment on agro-industrial wastes for obtainment of free sugars for bioethanol production

This study was designed to evaluate selected chemical and microbiological treatments for the conversion of certain local agro-industrial wastes (rice straw, corn stalks, sawdust, sugar beet waste and sugarcane bagasse) to ethanol. The chemical composition of these feedstocks was determined. Conversion of wastes to free sugars by acid hydrolysis varied from one treatment to another. In single-stage dilute acid hydrolysis, increasing acid concentration from 1 % (v/v) to 5 % (v/v) decreased the conversion percentage of almost all treated agro-industrial wastes. Lower conversion percentages for some treatments were obtained when increasing the residence time from 90 to 120min. The two-stage dilute acid hydrolysis by phosphoric acid (1.0 % v/v) followed by sulphuric acid (1.0 % v/v) resulted in the highest conversion percentage (41.3 % w/w) on treated sugar beet waste. This treatment when neutralized, amended with some nutrients and inoculated with baker's yeast, achieved the highest ethanol concentration (1.0 % v/v). Formation of furfural and hydroxymethylfurfural (HMF) were functions of type of acid hydrolysis, acid concentration, residence time and feedstock type. The highest bioconversion of 5 % wastes (37.8 % w/w) was recorded on sugar beet waste by Trichoderma viride EMCC 107. This treatment when followed by baker's yeast fermentation, 0.41 % (v/v) ethanol and 8.2 % (v/w) conversion coefficient were obtained.

Utilization of Agro-industrial Wastes for the Simultaneous Production of Amylase and Xylanase by Thermophilic Actinomycetes

Agro-industrial wastes such as sugarcane bagasse, wheat bran, rice bran, corn cob and wheat straw are cheapest and abundantly available natural carbon sources. The present study was aimed to production of amylase and xylanase simultaneously using agro-industrial waste as the sole carbon source. Seven thermophilic strains of actinomycete were isolated from the mushroom compost. Among of these, strain designated MSC702 having high potential to utilize agro-industrial wastes for the production of amylase and xylanase. Strain MSC702 was identified as novel species of Streptomyces through morphological characterization and 16S rRNA gene sequence. Enzyme production was determined using 1% (w/v) of various agro-industrial waste in production medium containing (g/100mL): K2HPO4(0.1), (NH4)2SO4(0.1), NaCl (0.1), MgSO4(0.1) at pH 7.0 after incubation of 48 h at 50°C. The amylase activity (373.89 IU/mL) and xylanase activity (30.15 IU/mL) was maximum in rice bran. The decreasing order of amylase and xylanase activity in different type of agro-industrial wastes were found rice bran (RB) > corn cob (CC) > wheat bran (WB) > wheat straw (WS) > sugarcane bagasse (SB) and rice bran (RB) > wheat bran (WB) > wheat straw (WS) > sugarcane bagasse (SB) > corn cob (CC), respectively. Mixed effect of different agro-industrial wastes was examined in different ratios. Enzyme yield of amylase and xylanase was ~1.3 and ~2.0 fold higher with RB: WB in 1:2 ratio.

Amylase production by solid-state fermentation of agro-industrial wastes using Bacillus sp

Solid state fermentation was carried out using various agro- industrial wastes with the best amylase producing strain isolated from soil. Different physicochemical conditions were varied for maximum enzyme production. The strain produced about 5400 units/g of amylase at 1:3 moisture content, 20 percent inoculum, after 72 h of incubation with Mustard Oil seed cake as the substrate. The optimum temperature and pH of the enzyme activity were found to be 50ºC and 6 respectively. The enzyme was found to be thermostable at 70ºC for about 2 h without any salt. It showed stability at pH range 5-7. The metal ions as Na+, Ca++, Mg++ and Co++ enhanced the enzyme activity.

Amylase production by solid-state fermentation of agro-industrial wastes using Bacillus sp

Solid state fermentation was carried out using various agro- industrial wastes with the best amylase producing strain isolated from soil. Different physicochemical conditions were varied for maximum enzyme production. The strain produced about 5400 units/g of amylase at 1:3 moisture content, 20% inoculum, after 72 h of incubation with Mustard Oil seed cake as the substrate. The optimum temperature and pH of the enzyme activity were found to be 50ºC and 6 respectively. The enzyme was found to be thermostable at 70ºC for about 2 h without any salt. It showed stability at pH range 5-7. The metal ions as Na+, Ca++, Mg++ and Co++ enhanced the enzyme activity.

Cultivation of Agaricus blazei on Pleurotus spp. spent substrate

The aim of this work was the use of Pleurotus ostreatus and Pleurotus sajor-caju for the previous lignocellulolytic decomposition of banana tree leaf straw and the further use of the degraded straw as substrate for the culture of Agaricus blazei. For optimising the production of A. blazei in terms of yield (Y percent) and biological efficiency (BE percent), adjustments to the composition of the substrate were evaluated in a 2(5) experimental design. The following components were tested in relation to percent of substrate dry mass: urea (1 and 10 percent), rice bran (10 or 20 percent) or ammonium sulphate (0 or 10 percent), inoculum (10 or 20 percent) and the casing material (subsoil or burned rice husks). The best results (79.71 Y percent and 6.73 BE percent) were found when the substrate containing 10 percent of rice bran, without ammonium sulphate, inoculated with 20 percent and covered with subsoil was used.

O cultivo de fungos comestíveis e medicinais utilizando resíduos da agroindústria vem se apresentando como uma alternativa econômica para o pequeno produtor rural, favorecendo a agricultura familiar do nordeste catarinense. Este trabalho avaliou o fungo Pleurotus para a decomposição lignocelulolítica de palha de folhas de bananeira e a utilização da palha residual como substrato para o cultivo de Agaricus blazei. Ajustes na composição do substrato residual de Pleurotus, tais como o tipo e a concentração da fonte de nitrogênio, a porcentagem de inóculo e a camada de cobertura, foram avaliadas. O substrato residual que mais favoreceu a produção de A. blazei em Eficiência Biológica (6,73 por cento), Rendimento (79,71 por cento) e menor tempo para emissão do primeiro primórdio (27 dias) foi o substrato residual de P. ostreatus inoculado com 20 por cento de inóculo (ms), 10 por cento de farelo de arroz (ms), sem sulfato de amônio e utilizando terra de subsolo como camada de cobertura.